Powerful hand-held saw, designed to cut masonry, reinforced and non-reinforced concrete and natural stone. If equipped with an abrasive blade, it is suitable for metal cutting, Used to cut window, door and skylight openings as well to cut asphalt. Possible to flush cut with special accessory.

Large cutting capacity: cutting depth up to 160 mm (6 in) using a 400 mm (16 in) steel blade and smaller flange. A roller guide allows to adjust the cutting depth.

Metal cutting: you can mount to the TP400 abrasive blades for metal cutting. Common applications are pipe cutting or rail cutting.

Power: the most powerful hand-held electric saw in the industry, equipped with a 3000 W (4 HP) electric motor. It can be plugged to a regular 20 Amp outlet.

Ergonomics and easy handling: specifically designed for concrete/masonry cutting. With the compact design and the proper positioned handles this machine becomes easier to handle and allows excellent visibility over the cutting area, besides a comfortable working position.

Efficient dust suppression and blade life: water is delivered through the center of the blade shaft. This allows very efficient dust suppression and an even cooling of the diamond blade, resulting in extended blade life. The amount of water used is very limited avoiding excessive slurry and clean up.

Electricity safety: designed in compliance with the most restrictive European and international regulations. Equipped with safety ground fault interrupter (GFI or PRCD) on the cord, ground connection and double insulation.

Indoor safety: the electric motor allows you to safely operate outdoor and indoor, avoiding exhaust gas inhalation.

Light weight and reduced noise: the electric motor allows low sound level and light weight (24 lb).

CARDI electronic clutch: the TP400 is equipped with a “smart electronic” that cuts off power to the motor when the motor is overloaded or in case of jamming, protecting operator and motor. After relieving pressure on the blade, hand saw will pick up rpm again. The operator can continue to work.

CARDI soft start: the TP400 is equipped with a “smart electronic” that includes a soft start ensuring a smooth and safe start for the operator when staring. This device allows also to plug the TP400 to a regular 20 Amp household outlet.

Toughness: the TP400 has been designed for heavy duty and professional use. This is the reason why most its components are made of metal, for example the blade guard and the motor case.

Flush cutting: available accessory that enables the TP400 to flush cut.